Skip to content
C & H Plastics, Inc.
  • HOME
  • ABOUT US
  • WHAT WE DO
    • DESIGN
    • PROTOTYPING
    • INJECTION MOLDS
    • MOLD MAINTENANCE
    • COLOR MATCHING
    • MANUFACTURING
    • ASSEMBLY & PACK
  • QUALITY ASSURANCE
  • OUR BLOG
  • DOWNLOADS
  • CONTACT US

Category: Tech Tips

Which kind of plastic should I use?

Posted May 16, 2017May 13, 2020 RBatemanPosted in Tech Tips

Are you starting a new injection molded project? Let’s discuss how to find the right plastic material to use… With so many different types of plastic materials on the market, how do you […]

How Injection Molding Machines Work

How Injection Molding Machines Work

Posted March 10, 2017May 7, 2020 RBatemanPosted in Tech Tips

Here at C&H Plastics we use 18 different injection molding machines so we can mold a variety of parts. So, what are the basics of a thermoplastic injection molding machine? In general, injection […]

Color Matching of Plastic Parts

The Secret to the Precise Color Matching of Plastic Parts

Posted January 31, 2017October 19, 2017 RBatemanPosted in Tech Tips

Often some of the different plastic parts in a project must color match. Though the human eye can pretty accurately judge color, to determine it accurately over time is a different story. It’s […]

Common Injection Molding Terms

C&H Plastics Blog… We’re Back with Some Common Injection Molding Terms

Posted September 9, 2016October 11, 2017 RBatemanPosted in Tech Tips

Like every industry, the thermoplastic injection molding business has its own technical language. But we sometimes forget that what’s familiar to us may not be so clear to our customers. So, now that […]

Choosing the Right Mold

Choosing the Right Mold Classification Saves You Time and Money

Posted June 24, 2016October 4, 2017 RBatemanLeave a commentPosted in Tech Tips

One of the first things we’ll consider in quoting the mold is the right class mold for your project. We can determine the best mold class based on the tolerances allowed on your […]

Basics of Plastic Injection Molding

Some Good to Know Basics of Plastic Injection Molding

Posted May 10, 2016May 26, 2020 RBatemanPosted in Tech Tips

After rapid prototyping proves your design and we’ve clarified all requirements affecting the design of the mold, we’ve reached the next phase in the manufacture of your plastic part.  We’re ready to have […]

Specifying Materials

What Everybody Ought to Know about Specifying Materials

Posted April 27, 2016October 4, 2017 RBatemanPosted in Tech Tips

You might think that you’re better off being specific as to the grade material for your part. The thing is, we’ve actually found that specifying a grade material in your blueprint can cost […]

Rapid Prototyping

Discover Rapid Prototyping… “Printing” Your Plastic Part

Posted April 18, 2016October 4, 2017 RBatemanPosted in Tech Tips

Step two after part design in the preproduction phase of your plastic part is the making of the prototype. This is where your creativity meets realty! Our rapid prototyping can produce an ABS […]

5 Tips for Quality Plastic Part Design

Posted April 12, 2016October 16, 2017 RBatemanPosted in Tech Tips

You’ll save time and money with plastic parts designed to be cost efficient and as easily moldable as possible. And remember, after you start building the mold or worse, once your parts are […]

CONTACT US

C&H Plastics
103 Conger Avenue
Waterville, NY 13480

Phone: 315-841-4101
Fax: 315-841-8141

Blog Topics

  • Announcements
  • Tech Tips

Connect

Facebook
LinkedIn
Skype
Email

Recent Posts

  • Reshoring Your Products
  • COVID -19 Update
  • Which kind of plastic should I use?

Subscribe

Join Our Email List Here
For Email Marketing you can trust.
C&H Plastics | 103 Conger Avenue, Waterville, New York 13480 | Phone: 315-841-4101 | Fax: 315-841-8141

Powered bydreamhost cpanel

error: Content is protected !!